Цитировать

Форум по СНПЧ: Обнуление кода ошибки на принтерах Hp без паяльника и передергивания - Форум по СНПЧ

Перейти к содержимому

Бесчиповые прошивки для Epson: Пошаговая инструкция по установке. Купить Код Активации

Важно

На форуме:
- запрещены никнеймы и подписи содержащие служебные символы и ссылки;
- запрещено название тем ЗАГЛАВНЫМИ буквами и содержащих слова «хэлп», «памагите», «срочно», либо украшательства «-!!!ХЭЛП!!!-»;
- запрещена реклама в любом виде;
- запрещено создание одинаковых тем или сообщений в разных разделах форума;
- запрещено написание всего сообщения ЗАГЛАВНЫМИ буквами, или шрифтом отличным от используемого по умолчанию. Выделяйте только необходимое;
- запрещено полное цитирование сообщений без необходимости;
- запрещено повторять вопросы, освещенные в ФАК;
- запрещено создание тем или сообщений без подробного описания сути;
- запрещен мат, албанский, жаргон;
- запрещено публичное обсуждение действий администрации;
- запрещены ответы в темы нарушающие правила форума;
За нарушения – БАН с удалением сообщений и тем.
Страница 1 из 1
  • Вы не можете создать новую тему
  • Вы не можете ответить в тему

Обнуление кода ошибки на принтерах Hp без паяльника и передергивания Обнуление кода ошибки

|    Сообщение #1 Отправлено 06 февраля 2009 - 12:40   dark_xor

Нашел решение для обнуления ЛЮБОГО КОДА ОШИБКИ для принтеров HP Photosmart (возможно, и не только для них, не пробовал):

Как работает у меня:
1) Зажимаем [стрелку Влево], потом нажимаем [кнопку "Настройка"(Setup)], посли этого отпускаем их обоих. Появляется меню "Enter Special Key Combo".

1.5) (мне это не понадобилось) Зажать обе кнопки "Печать фото"("Print Photos") и "Коррекция фотографии"("Red Eye Removal"), потом отпустить их. После этого нажать и отпустить по очереди "Коррекция фотографии"("Red Eye Removal"),"Печать фото"("Print Photos"),"Коррекция фотографии"("Red Eye Removal").

2) Теперь нажимаем [стрелку Вправо], пока не перейдем на пункт "System Configuration".

3) Нажимаем OK.

4) Нажимаем вправо, пока не дойдем до "Hardware failure status: Clear. Press OK to clear". Нажимаем "OK". Если у Вас принтер работает нормально, то этого пункта в меню не будет. НЕ ПЕЧАТАТЬ ПОСЛЕ ЭТОГО, А ВЫКЛЮЧИТЬ ПРИНТЕР ЧЕРЕЗ КНОПКУ ВЫКЛЮЧЕНИЯ!!!

5) Выключаем принтер, включаем снова. Все, код ошибки сброшен.

Первоисточник на английском:
Если что-то не получается - ЧИТАЙТЕ ПЕРВОИСТОЧНИК!!! Это лог общения человека со службой поддержки HP.

OK I had the hp error code 0xc18a0001 problem and here is the conversation I had with the tech.....
james cowan: hp error code 0xc18a0001
Earnest: I will assist you in this regard
james cowan: great
Earnest: I understand that a error code with 0xc18a0001 with "Ink System failure" is displayed on the front panel of the All-In-One printer. Am I correct?
james cowan: correct
Earnest: Thank you for confirmation
Earnest: May I have the model number of All-In-One you are using?
james cowan: c6250
Earnest: Thank you for information.
Earnest: James, please let me know the room temperature in which printer is replaced
james cowan: 67 degrees f
Earnest: Okay
Earnest: Please perform the below steps on the front panel of the printer to resolve the issue
james cowan: ok
Earnest: Press and hold the "left arrow" key.
Press the "Setup" key and release both keys, Display should say "Enter Special Key Combo"
Press and release the "OK" button.
Earnest: Please ignore the above steps, James
james cowan: ok yes nothing seemed to do anything
Earnest: Please perform the below steps on the front panel of the printer
Earnest: Press and Hold the "Print Photos" &"Red Eye Removal" buttons. Release both buttons. Display should say"Enter Special Key Combo"
Press and release in sequence"Red Eye Removal","Print Photos","Red Eye Removal"
Earnest: Display should say “Support” and display the FW rev (something like R0616R)
james cowan: COxxFN0723BR
Earnest: Okay
Earnest: 2. Press and release the right arrow button until the display says “System Configuration Menu
james cowan: ok
Earnest: 3. Press and release the "OK" button.
james cowan: ok and it says hardware failure status
Earnest: Display should say "Hardware failure status: Clear. Press OK to clear".
Earnest: Press and release the "OK" Button. Message changes to "Hardware failure status Cleared. Press Cancel to continue".
Earnest: Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the "Ink System Failure" screen appears. PLEASE DO NOT TRY TO PRINT AT THIS STAGE.
james cowan: ok
Earnest: Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.
Earnest: Let me know once you are done with the above steps
james cowan: ok its unplugged
Earnest: Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer
Earnest: Turn the unit on. The printer may display message "USE POWER BUTTON TO SHUTDOWN THE PRINTER" followed by "PRESS OK TO CONTINUE". Press OK.
james cowan: ok
Earnest: Let me know the message displaying on the front panel of the printer
james cowan: printer preparation occuring - do not interrupt
Earnest: Okay
james cowan: ok its done
Earnest: Let us print a self test page from the printer now
james cowan: ok deal
Earnest: 1) Load letter, A4, or legal unused plain, white paper into the input tray.
2) Make sure that the printer is on and loaded with unused plain, white paper.
3) Press Setup . The Setup menu appears.
4) Press the down arrow button to select Tools , and then press OK .
5) Press the down arrow button to select Self-test Report , and press OK . The self-test report prints.
james cowan: ok printing
Earnest: Okay, please check whether all the colors pritned perfectly on the test page
james cowan: perfect
Earnest: Great..Cheers!!!
james cowan: thank you very much
Earnest: James, now you can continue using the printer
Earnest: I appreciate your efforts and patience in trying to resolve the issue.



P.S. Для модератора - если запостил не в тот подфорум - извините, просто хотел поделиться опытом, нет времени разбираться в правилах.

Поделиться темой:


Страница 1 из 1
  • Вы не можете создать новую тему
  • Вы не можете ответить в тему

1 человек читают эту тему
0 пользователей, 1 гостей, 0 скрытых пользователей

Скачать обновленную версию бесплатной программы PrintHelp 2023, купить Код Сброса - PrintHelp.info